--- title: "Data Diode | Module Instance | N3uron KB V.1.20" slug: "data-diode-module-instance" description: "Data Diode is a N3uron module designed to provide a cybersecurity solution that ensures information can only travel in one direction. Data Diode…" updated: 2021-12-10T11:47:24Z published: 2021-12-10T11:47:24Z canonical: "docs.n3uron.com/data-diode-module-instance" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.n3uron.com/llms.txt > Use this file to discover all available pages before exploring further. # Creating Module Instances The first step when using **DataDiode** after **N3uron** installation is to instantiate a **DataDiode** module: - Open **N3uron** and navigate to the “Config” menu. - Click on “Modules”, then create a new module. This instance can be given any name (except names with special characters like “.”, “/”, etc.), although users are recommended to name instances in a similar way to the name of the module being instantiated for easy identification. In this example, it has been named **DataDiode**. ![](https://cdn.document360.io/54093ab5-6b22-4542-a265-04377931f11a/Images/Documentation/01-Creating-new-module-instances.png) Figure 2: Creating new module instances By setting the module **type** to **DataDiode**, the created instance will automatically become a **DataDiode** instance. Once saved, the name should appear in bold in the module list because there are unsaved changes. ![](https://cdn.document360.io/54093ab5-6b22-4542-a265-04377931f11a/Images/Documentation/03-Setting-the-instance-type.png)Figure 3: Setting the instance type Each instance can also be configured with the following options: - **Required****:** When set to enabled and when this module is receiving data from other **N3uron** nodes, all links will be paused whilst the module is offline to avoid data loss. If disabled, this module will have no effect on links when offline. - **Start****:** This section controls how the module behaves when the **N3uron** service is started (which also includes service restarts). - **Enabled****:** If true, the module will automatically start when the **N3uron** service starts. If false, the module must be started manually. - **Start** **delay****:** When automatic start is enabled, this setting is used to control how much delay there should be between starting the **N3uron** service and starting the module. This value is displayed in milliseconds. - **Monitor****:** This section is used to monitor the status of each module, as well as to enable automatic restart if the module goes offline. - **Automatic** **restart****:** If true, whenever the module goes offline (except when manually stopped by the user), the module will automatically restart. - **Restart** **delay****:** Determines the delay before restarting the module after it has gone offline.