--- title: "Derived Tags | Module Instance | N3uron KB V.1.20" slug: "derived-tags-module-instance" description: "Derived Tags is a N3uron module designed to implement custom logic, advanced calculations, and data aggregation for operational data analysis at N3uron…" updated: 2021-12-16T09:48:32Z published: 2021-12-16T09:48:32Z canonical: "docs.n3uron.com/derived-tags-module-instance" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.n3uron.com/llms.txt > Use this file to discover all available pages before exploring further. # Creating Module Instances - Open **N3uron** and navigate to the “Config” view. - Click on “Modules”, then create a new module. This instance can be given any name (except names with special characters like ‘.’, ‘/’, etc.), although users are recommended to name instances in a similar way to the name of the module being instantiated. In this example, it has been named **Derived Tags**. ![](https://cdn.document360.io/54093ab5-6b22-4542-a265-04377931f11a/Images/Documentation/01-Creating-new-module-instances(1).png) Figure 1: Creating new module instances By setting the module **type** to **Derived Tags**, the created instance will automatically become a **Derived Tags** instance. Once saved, **Derived Tags** should appear in the module list in bold because there are unsaved changes. ![](https://cdn.document360.io/54093ab5-6b22-4542-a265-04377931f11a/Images/Documentation/02-Setting-the-instnace-type.png) Figure 2: Setting the instance type Additionally, each instance can be configured with the following options: - **Required:** When enabled, all links will be paused when the module is offline to avoid data loss. If disabled, this module will have no effect on links when offline. - **Start:** This section controls how the module behaves when the **N3uron** service is started (which also includes service restarts). - **Enabled:** If true, the module will automatically start when the **N3uron** services starts. Otherwise, the module must be started manually. - **Start delay:** When automatic start is enabled, this setting is used to control how much delay there should be between starting the **N3uron** service and starting the module. This value is displayed in milliseconds. - **Monitor:** This section is used to monitor the status of each module, as well as to enable it to automatically restart if it goes offline. - **Automatic restart:** If true, whenever the module goes offline (except when manually stopped by the user), the module will automatically restart. - **Restart delay:** Determines the delay before restarting the module after it has gone offline.