--- title: "IEC 102 Client | Examples | N3uron KB V.1.20" slug: "iec-102-client-examples" description: "IEC 102 Client is a N3uron module designed to allow users to quickly and easily connect to any electrical meter supporting IEC60870-5-102 (REE) protocol…" updated: 2022-01-14T13:06:38Z published: 2022-01-14T13:06:38Z canonical: "docs.n3uron.com/iec-102-client-examples" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.n3uron.com/llms.txt > Use this file to discover all available pages before exploring further. # Examples ## Connecting to an IEC-102 meter through an Ethernet to serial converter configured as a TCP server: In this example, **Iec102Client** is used to connect to a meter through a TCP server. The configuration will also include a gateway in order to permit the utility to connect to the meter and download the load profile. - **Step 1:** Channel configuration for TCP server connections. ![](https://cdn.document360.io/54093ab5-6b22-4542-a265-04377931f11a/Images/Documentation/9-Example%20channel%20set%20up%20to%20a%20TCP%20server.png)Figure 9. Example channel set up for connections to a TCP server - **Step 2:** Gateway configuration settings for allowing transparent connections between third-party applications and the electrical meter to be established. Even when using a TCP server, third party applications must still connect through the **Iec102Client**, as connecting directly to the TCP server would originate collisions between the application and the **Iec102Client**. ![](https://cdn.document360.io/54093ab5-6b22-4542-a265-04377931f11a/Images/Documentation/10-%20Example%20gateway%20configuration%20when%20listening%20on%20port%205001%20for%20incoming%20connections.png)Figure 10. Example gateway configuration when listening on port 5001 for incoming connections. - **Step 3:** Device configuration for connections to the electrical meter. Link address and point address can usually be obtained from the meter display. See Introduction section for more details. ![](https://cdn.document360.io/54093ab5-6b22-4542-a265-04377931f11a/Images/Documentation/11-%20Example%20configuration%20for%20connections%20to%20electrical%20meters.png)Figure 11. Example configuration for connections to electrical meters - **Step 4:** Tag configuration for assigning any signals available in the meter to tags. ![](https://cdn.document360.io/54093ab5-6b22-4542-a265-04377931f11a/Images/Documentation/Figure%2012-%20Example%20configuration%20for%20assigning%20the%20value%20of%20the%20meter%E2%80%99s%20active%20power%20to%20a%20tag..png) Figure 12. Example configuration for assigning the value of the meter’s active power to a tag.