--- title: "Web Vision | Viewer | N3uron KB V.1.20" slug: "web-vision-viewer" description: "Web Vision is a N3uron module developed to create a pure web HMISCADA interface for industrial applications. Based entirely on HTML5 technology…" updated: 2021-12-16T09:03:39Z published: 2021-12-16T09:03:39Z canonical: "docs.n3uron.com/web-vision-viewer" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.n3uron.com/llms.txt > Use this file to discover all available pages before exploring further. # Viewer The **Viewer** will initially load the template marked as “Startup template” on the designer. The selected template will be marked with an asterisk (*). If no startup template is selected, an error message will be displayed when opening the **Viewer**: ![](https://cdn.document360.io/54093ab5-6b22-4542-a265-04377931f11a/Images/Documentation/Figure%2018.png)Figure 18: Set startup template ![](https://cdn.document360.io/54093ab5-6b22-4542-a265-04377931f11a/Images/Documentation/Figure%2019.png)Figure 19: Unset startup template ![](https://cdn.document360.io/54093ab5-6b22-4542-a265-04377931f11a/Images/Documentation/Figure%2020.png)Figure 20: No startup template error popup. The **Viewer** mode is intended for end users such as operators who are not going to design the interface, but instead, just use it. The key differences from the designer are: - No Designer UI. Only contains a visual area that is created using the preselected startup template. - Startup template will match web browser size, regardless of the template’s original size. - Only the startup template will be loaded, resulting in quicker loading. - No selection, pan, or zoom interactions are permitted (however, the internal container zoom can be purposefully activated in the “Zoom & Pan” section). - Holding the control key is not needed for launch events (click, mouse enter, etc.) ![](https://cdn.document360.io/54093ab5-6b22-4542-a265-04377931f11a/Images/Documentation/Picture21.png)Figure 21: Viewer overview The Viewer can be launched from the **WebVision** configuration page in the WebUI, as shown in the below image: ![](https://cdn.document360.io/54093ab5-6b22-4542-a265-04377931f11a/Images/Documentation/Picture22(1).png)Figure 22: Buttons in the bottom-right corner for launching the Designer and Viewer Alternatively, the **Viewer** can also be accessed by adding /ui to the url used to connect to the system.